91
Scan Yes Yes N/A N/A SB2 Button Short press SB2 to enable/disable scan.
Multiple (16)
Scan Lists
Yes No Ye s Ye s
ON - All
Channels
Use CPS for editing Scan Lists (adding/removing
channels to be scanned). For display models only:
you can add/delete channels in the scan lists using
front panel by going into Programming Mode(1).
Scan, Auto
Scan
No Ye s No Ye s OFF
Feature available only for Non Display Models. For
front programming using front panel radio enter
Programming Mode(1)
Scramble (4) Yes No Ye s Ye s
O F F
(level 0)
Display models: you can program scramble using
front panel by going into Programming Mode(1).
Non-display model you need to program an SBx.
Time-Out
Timer
No No Ye s Ye s 60 seconds
Use CPS to program to program how long the PTT
can be pressed before the transmission is
automatically terminated. Values are 60, 120 and
180 seconds. (Pressing again PTT will start the
transmission again).
Features
Programmable Via
RADIO PANEL
Programmable via
CPS
Default Value Programming Tips
Display
Non-
Display
Display
Non-
Display
To Next Page
Loading...
Need help?
General
