Motorola Scriptor FLX4 - Setting the Alert Mode; Setting the Alert Pattern

10
Setting the Alert Mode
The alert can be set as either audible or silent.
➊ Press
Á to display the function menu.
➋ Press
ä to move the cursor to É or Œ.
The
É symbol is displayed if the message receiver is in
the silent alert mode (prompting you to enter the audible
mode, if desired). The
Œsymbol is displayed if the mes-
sage receiver is in the audible alert mode (prompting you
to enter the silent mode, if desired).
➌ Press
Á to select the desired alert mode.
If the selected mode is audible (É), your message
receiver emits a short chirp. If the selected mode is silent
(
Œ) and your message receiver is equipped with a vibra-
tor, your message receiver vibrates.
Setting the Alert Pattern
NOTE: The message receiver must be in the audible
alert mode to select the alert pattern.
Your message receiver has a standard alert (1), seven dif-
ferent pleasing alerts (2 through 8), and a chirping alert
(Õ), allowing you to select and change the alert. You can
also select no alert (
Œ).
To change your alert:
➊ Press
Á to display the function menu.
➋ Press
ä to move the cursor to È, then press Á.
➌ Press
ä or ã to move the cursor to the desired alert.
The message receiver gives a sample of each alert
when scrolling through the selections.
1027B15.fr5 Page 10 Thursday, December 5, 1996 09:56