30
4. You can dial phone numbers with up to 32
digits, but only the last 20 digits appear in the
display.
Press
‰ to see the entire phone number.
Ending a Call
To end a call:
Press
º or close the phone.
or
1. Press and hold until you hear a second
tone.
You will see
§ To End Call.
2. Press again to end the call.
Receiving a Call
Your phone must be powered on to receive calls. To
answer a call:
Press
æ or open the phone when the
phone rings.
Note: Opening the phone does not answer the call
if the Open to Answer feature is off. (See
“Deactivating Open to Answer” on page 92.)
Unanswered Call Indicator
When you cannot take a call, your TDMA digital
StarTAC™ phone keeps a count of your
unanswered calls and alerts you with the message
Missed XX Calls, where
XX
is the number of missed
calls.
Press to view missed calls.
Terminating the Ring or Vibrate
Indicator
You can terminate either the ring or the vibrate
indicator by pressing either of the volume keys
during the ring/vibrate cycle.
TDMA.book Page 30 Friday, April 7, 2000 4:45 PM
To Next Page
Loading...
