38
Recalling an Entry by
Memory Location
Each name and number you store is placed in a
memory location numbered 01-99. Once you have
stored names and numbers, you can recall them by
memory location:
1. Press
‰.
2. Enter the two-digit memory location of the
phone number you want.
3. Press and hold , or press æ to call the
number you selected.
Clearing a Phone Memory
Entry
Clearing an Entry by Name
1. Recall by name the entry that you want to
erase. (See “Recalling an Entry by Name” on
page 37.)
2. Press
Ç to clear the entry.
You will see Clear Entry?.
3. Press or
¬ to confirm that you want to
erase the entry.
The numbered location of the cleared entry is
shown in the display.
Clearing an Entry by Location Number
1. Recall by location the entry that you want to
erase.
2. Press
Ç to clear the display.
3. Press
¬ and the location you want to clear.
You will see XX Full Change?
4. Press
¬ to confirm that you want to erase
the entry.
TDMA.book Page 38 Friday, April 7, 2000 4:45 PM
To Next Page
Loading...
