32
Notes:
• This feature is not available on all models of
this phone.
• Once you switch from digital to analog mode,
you can not switch back to digital mode until
you turn your phone off and on again.
• When you switch from digital to analog mode,
you may still see the digital indicator while
the phone is idle (that is, not in an active call).
Redialing a Number
Automatic Redial
A fast busy signal indicates that the cellular system
is busy. With Automatic Redial, your phone calls
continuously for the next four minutes.
When it makes a connection, the phone rings or
vibrates. You can distinguish this ring because it is
half as long as the ring or vibrate for a new
incoming call. When the person you are calling
answers, you can begin talking.
If you hear a fast busy signal:
1. You will see Redial Call?
Press
or press æ to redial, or press º
to exit.
2. If the call does not go through after four
minutes, press , or press
æ to continue
the call attempt.
You will see Redial.
If you hear an ordinary busy signal:
1. Press
º to hang up.
2. Press or press
æ to redial the busy
number.
You will see Dialing 5551234.
TDMA.book Page 32 Friday, April 7, 2000 4:45 PM
To Next Page
Loading...
