54
7. Insert another pause, and enter the next
group of numbers by repeating steps 3
through 5 as many times as necessary.
You can store up to 32 digits, including
pauses. Then store the entire sequence as
you would any phone number.
8. Press
¬ to begin storing.
You will see Location __.
9. Enter the two-digit memory location where
you want the sequence stored.
You will see Alpha Or
§.
10. Enter a name for your sequence.
(See “How to Enter a Name” on page 36 for
details on entering names.)
11. Press when you finish entering the name.
Your phone confirms your entry by displaying
the location, number, and name you stored.
Placing a Call with Pauses
To use your stored sequence:
1. Recall the stored number with the pause
inserted.
2. Press and hold , or press æ, to place the
call.
3. When the recording prompts you for
information, press or
æ to send the next
set of stored numbers.
4. Press or press
æ as many times as
necessary, to transmit all the numbers.
TDMA.book Page 54 Friday, April 7, 2000 4:45 PM
To Next Page
Loading...
