Input Mode Menu
37
•If the word displayed is not the one you want after typing it completely,
press
#
for the next word candidate. You can also press
S
for the
next/previous candidate. When the desired one appears, press
-
(
OK
)
or
N
to put it inside the text frame, then a space will appear
automatically between the word and the cursor. So you can type the next
work directly without having to leave a space for it.
•After you enter a word in the text area, you can press
S
once to move
the cursor to the insertion point of the next/last character; long press to
move the cursor continuously.
•In the text area, press
+
(
DEL
) once to clear one character; long press
+
to clear all text.
To enter punctuation and symbols
:
•You can long press
*
to display a bar of available punctuation and
symbols at the bottom of the screen. Press
S
to scroll the symbols one by
one; long press
S
to scroll page by page. Press
-
(
OK
) or
N
to enter a
highlighted symbol, or press a corresponding number key for a desired
symbol directly (
1
~
9
, from left to right).
•Press
+
(
QUIT
) or
O
to exit the punctuation & symbol bar.
Demo of Smart input (iTAP)
To enter
Come home
on the message editor screen:
1.
Press
M
to access the input mode menu.
Select
Smart Input
and press
-
(
SEL
) or
N
.
CompleteVersion.book Page 37 Friday, October 26, 2001 4:45 PM
To Next Page
Loading...
