2. To select the sensitivity level, press the + or - button.
3. To exit menu, press the PTT button.
You can continue the set-up by pressing the Menu button.
Note: Using the iVOX or VOX causes a short delay in
transmission.
Setting the Dual Watch Mode
The Dual Watch mode enables you to scan the current channel and
another channel alternately.
1. Press the Menu/Lock button until the Dual Watch icon blinks.
The current call setting blinks.
2. To select the channel, press the + or - button. Then press the Menu/
Lock button.
3. To select the code, press the + or - button.
4. To activate Dual Watch, press the PTT button or wait until time out.
The screen alternates between the Home Channel and Dual Watch
Channel.
5. To end Dual Watch mode, press the Menu/Lock button.
Note: If you set the same channel and code as the current
channel, the Dual Watch Mode is not enabled.
Setting the VibraCall
™
Alert
The VibraCall
™
is a vibrating alert that notifies you when your radio
receives a message. The Vibrate Alert is triggered when you receive a
call and is triggered again only if no activity occurs in 30 seconds after
the previous call.
1. To turn the vibrating alerts on, press the Menu/Lock button until the
radio displays the VibraCall icon.
The current setting blinks.
2. To alternate between on and off, press the + or - button.
3. To confirm, press the PTT button and exit menu.
You can continue the set-up by pressing the Menu/Lock button.
Talkabout Application
Installing the Talkabout Application on your smartphone and connecting
your smartphone to your radio over Bluetooth allows you to share your
location, use text messaging, and use your smartphone to PTT without
the cell phone service. The feature also offers recording tracks and
controlling the radio settings by your smartphone. Talkabout application
feature assists in connecting a bluetooth earpiece to the radio.
This application is free and can be downloaded from the App Store
for IOS devices and from Google Play for Android devices. To find
the appropriate application, you can search for Motorola Talkabout
Application. User instructions are embedded in the application.
Note: Compatibility between different models is restricted for
the T800 series. The T800/T801 models are compatible with
each other, and the T802/T803 or above models are compatible
with each other. The T802/T803 models have light gray buttons
on the front of the radio, and black buttons on the side of the
radio.
Setting the Emergency Alert Mode
The Emergency Alert feature can be used to signal members in your
group of your need for urgent help. T800 series radios operate in
an automatic hands-free emergency control mode for a total of 30
seconds after activating the Emergency Alert. The radios in your group
automatically advance the speaker volume to the maximum setting and
play a tone for eight seconds. The alert tone is emitted from your own
radio speaker and the receiving radios in your group. After the eight
seconds alert, any spoken words or incidental sounds at your end is
transmitted to the group for 22 seconds. For the 30 seconds duration
of Emergency Alert mode, the radio controls and buttons are locked to
maximize reception of the emergency message.
1. Press and hold the Emergency button for three seconds.
2. To initiate the alert tone, release the button.
English
13
To Next Page
Loading...
Need help?
General
