Getting Started 13
ENGLISH
3. Insert the wire tab of the rechargeable battery pack into the contact slot as
shown below and fit the battery pack into the compartment.
4. Close the battery compartment cover and gently tighten the screw in a
clockwise direction using a small cross-head or flat end screwdriver.
2.3 Wireless Fence Unit Power Supply and Charging
1. Connect the small plug of the power adapter (5.9V DC/1A, supplied with
the product) to the power connector of the Wireless Fence Unit and the
other end into the electrical outlet.
NOTE
Only use the supplied power adapter (5.9V DC / 1A). The battery pack will take
approximately 16 hours to charge.The average battery life per charge is up to
27 hours, depending on how often you use it.
2. Press and hold POWER KEY to power the Wireless Fence Unit on or
off.
To Next Page
Loading...
Need help?
General
