Getting Started 1 - 3
Unpacking the Wearable Terminal
Carefully remove all protective material from around the wearable terminal and save the shipping container for later
storage and shipping.
Verify that you received all equipment listed below:
•
Wearable terminal
•
Lithium-ion battery
•
Regulatory Guide
•
Quick Start Guide.
Inspect the equipment for damage. If you are missing any equipment or if you find any damaged equipment,
contact the Motorola Enterprise Mobility Support Center immediately. See page xiii for contact information.
Accessories
Table 1-2 lists the major accessories available for the wearable terminal:
WLAN Status LED Indicates the status of the wireless connection. (Voice Only WT4090 only)
Battery Status LED Indicates when the battery charge level falls below 30%. (Voice Only WT4090 only)
Application Controlled LED Application programmable. (Voice Only WT4090 only)
Speaker Provides audio playback.
Keypads Enable user input.
Battery Provides power to the wearable terminal.
Interface Connector Provides electrical connection to an accessory, such as a scanner.
Cradle Connector Provides electrical connection to a cradle.
Battery Release Releases the battery for removal.
Cleat Provides mounting for the wrist mount and cradles.
Table 1-1
Parts of the Wearable Terminal (Continued)
Item Description
Table 1-2
Wearable Terminal Accessories
Accessory Description
Single Slot USB Cradle Charges the
wearable terminal
main battery and a spare battery. It also synchronizes
the
wearable terminal
with a host computer through a USB connection.
Four Slot Ethernet Cradle Charges up to four
wearable terminals
(with main battery installed) and provides
communication through an Ethernet connection.
Four Slot Spare Battery
Charger
Charges up to four spare batteries.
To Next Page
Loading...
