Accessories 3 - 3
•
Synchronizes information between the wearable terminal and a host computer. (With customized or third
party software, it can also be used to synchronize the wearable terminal with corporate databases.)
•
Charges the wearable terminal’s battery and a spare battery.
•
Provides a location for storing a scanner when a wearable terminal is docked in the cradle.
Battery Charging Indicators
The Single Slot USB cradle can charge the wearable terminal’s main battery and a spare battery simultaneously.
The wearable terminal’s amber Charge Status LED indicates the status of the battery charging in the wearable
terminal. See Table 1-3 on page 1-8 for charging status indications.
The amber Spare Battery Charging LED on the cradle (see Figure 3-1 on page 3-2) indicates the status of the
spare battery charging in the cradle. See Table 3-1 for charging status indications. The standard capacity battery
fully charges in less than four hours and the extended capacity battery fully charges in less than eight hours.
Table 3-1
Spare Battery LED Charging Indicators
Spare Battery LED
(on cradle)
Indication
Off No spare battery in well; spare battery not placed correctly; cradle is not powered.
Fast Blinking Amber Charging error:
•
Temperature is too low or too high.
•
Charging has gone on too long without completing (typically eight hours).
Slow Blinking Amber Spare battery is charging.
Solid Amber Charging complete.
To Next Page
Loading...
