4 - 8 WT4090 Wearable Terminal User Guide
Wearable terminal
turns itself off.
Wearable terminal
is inactive.
The
wearable terminal
turns off after a period of inactivity. If the
wearable terminal
is running on battery power, this period can be
set to 30 sec., 1, 2, 3, 4, 5 or 6 minutes. If the
wearable terminal
is
running on external power, this period can be set to 1, 2, 3, 5, 10, 15
and 30 minutes.
Check the power settings by selecting
Start
>
Settings
>
Control
Panel
>
Power
icon >
Power Off
tab.
Change the setting if you need a longer delay before the automatic
shutoff feature activates.
Voice Only WT4090
was set to suspend.
Return Voice Only WT4090 suspend setting to factory default
(disabled).
Battery is depleted. Replace or recharge the battery.
Battery is not
inserted properly.
Insert the battery properly (see
Installing and Removing the Main
Battery on page 1-7
).
The
wearable
terminal
’s battery is
low and it powers
down to protect
memory content.
Replace or recharge the battery.
A message appears
stating that the
wearable terminal
memory is full.(not
applicable to voice
only configuration)
Too many files
stored on the
wearable terminal
.
Delete unused memos and records. You can save these records on
the host computer.
Too many
applications
installed on the
wearable terminal
.
If you have installed additional applications on the
wearable
terminal
, remove them to recover memory.
Select
Start
>
Settings
>
Control Panel
>
Remove Programs
icon.
Select the unused program and select
Remove.
Table 4-1
Troubleshooting the Wearable Terminal (Continued)
Problem Cause Solution
To Next Page
Loading...
