Get started
3 Select moto buds+ or moto buds in Bluetooth settings on the device
you want to pair.
moto buds+ (XT2441-1)
moto buds (XT2443-1)
Pair and connect with non-Android devices. Turn on Bluetooth. With earbuds in the open case, press and hold the function button (see Charging case) for 2 seconds until the LED
indicator ashes blue.
4 Follow the on-screen instructions to complete the pairing.
Dual connection
Your earbuds can be connected with two devices and dual connection is
off by default. Turn on dual connection so you Do not have to manually
switch connections.
Note: To turn dual connection on, at least one of your connected devices
should be running Android system.
1 Install the Moto Buds app on your Android device.
2 Make sure your earbuds are connected to your Android device (see
Pair and connect).
3 Tap Moto Buds, then tap the switch next to Dual connection to
turn it on.
4 Follow the steps in Pair and connect to connect with a second device.
Notes:
» When your earbuds are paired with two devices, you can only hear
audio from one device at a time. Audio playback is prioritized as
follows: incoming calls take precedence over media playback (music
moto buds+
2 s
moto buds
2 s
To Next Page
Loading...
Need help?
General