74 75
ENEN
USE OF THE STEAM BASKET
The cooking times are given for information only. In the
majority of cases they enable satisfactory cooking.
Nevertheless, certain conditions will aect the cooking
time:
– the size of the vegetables (cut or uncut)
– the quantity of ingredients in the basket
– the variety of vegetables, their ripeness
– the amount of water in the bowl, which must
correspond to the steam graduation.
If not cooked enough, you can add additional cooking
time.
Max quantities for the steamer programme
Water level in the bowl. 700ml
Internal steamer basket (100°C) External steamer basket* (120°C)
Max quantity: Cooking time Max quantity: Cooking time
Cut carrots 700g 35 minutes 1kg 45 minutes
Cubes of courgettes 600g 25 minutes 1kg 35 minutes
Broccoli orets 400g 20 minutes 600g 30 minutes
Cauliower orets 400g 25 minutes 1kg 35 minutes
White part of sliced leeks 400g 30 minutes 800g 40 minutes
Red or green peppers in strips 400g 20 minutes 600g 30 minutes
Cubed potatoes 800g 30 minutes 1.2kg; 40 minutes
Fish fillets, fresh or defrosted 500g 15 minutes 1kg 25 minutes
Whole fish, fresh or frozen 800g 30 minutes
Mussels 1.5kg 30 minutes
Prawns, whole or defrosted 500g 15 minutes 800g 25 minutes
Chicken breast 500g 25 minutes 1kg 35 minutes
Pork fillets 500g 30 minutes 1kg 45 minutes
Some recipes may cause overowing, due to the appearance of bubbles, in particular when using frozen
vegetables. In this case, it is up to you to reduce the volumes accordingly.
MANUAL MODE
1- Press directly on the selector representing the setting that you have chosen to adjust, i.e. the
speed selector (C3) or the cooking temperature selector (C5) or the time selector (C4), and the
selected setting ashes on the screen.
2- Next, adjust the parameter(s) using the +/- selector (C14). For safety reasons, it is not
possible to adjust a temperature without setting a cooking time.
3- When you have finished adjusting your settings, press the “Start” button (C13). When your
appliance starts up, a white light will come on around the START / STOP button to indicate that
the programme has started. You can then stop the appliance at any time by pressing the “stop”
button. Programming is then in pause mode, with the white light blinking. You have the option
of restarting again by pressing "start". If you have selected the wrong programming and would
like to cancel, press the "Stop" button for 2 seconds to start from scratch.
4- When the programme is completed, the appliance beeps 5 times.
2 Pulse functions
To use Pulse (intermittent), enable and stop the function by simply pressing on the "pulse” selector. For this, the LCD
screen also assists you by showing you the time of use. When the function has begun, you have the option of stopping
the appliance at any time by pressing on the "stop” button. The function is then in pause mode and you have the option
to restart again by pressing "start".
Manual use of the control panel:
This mode allows you to customise the preparation settings according to your liking.
“Speed” Button (C3): select the engine speed, up to 12
progressive and continuous speeds.
“Temp” Button (C5): Select the cooking temperature of
30° to 120°.
“Time” button (C4): Select the operating duration of up
to 2 hours of continuous use.
“Pulse” button (C12): to give a quick boost without
adjusting the settings.
START/STOP BUTTON: This button has 4 functions:
– To start or stop a preparation: START/STOP (C13)
– To increase or decrease the settings by turning the +/-
selector button (C14) in either direction.
– To pause a preparation once the appliance has been
started.
– To reset the selected parameters by pressing for
2seconds.