Mount-It! MI-2041 - Product Overview; Key Features

2
Product Overview:
The mount is an arculang lt and swivel arm mount that collapses to a slim 2" yet extends a full 15"
while offering 180° swivel and ±15° lt. It also allows for 360° rotaon adjustment to ensure a level display.
The mount supports VESA hole paerns 75x75mm to 100x100mm. Most 12-24" TV displays use the VESA
100x100 hole paern. Some TVs in the 26-32" range also use VESA 100x100. If the weight is below 30lbs,
the mount can mount these larger displays. However, for addional stability, we recommend upgrading
from the mount to the mount for TVs larger than 23". For more informaon on what exact hole paerns
this mount will fit and the corresponding size in inches, please see the Supported VESA paerns in the
Specificaons secon below. The arms and mounng brackets are constructed with 100% High Grade Steel
for a sturdy and reliable mount. The mount comes with a complete hardware kit for mounng to the wall
and to the back of your TV. Thank you for choosing this Mount.
Key Features:
● Fits VESA Hole Paerns 75x75 and 100x100MM
● Flush 2" Profile When Folded Yet Extends to 15"
● 180° Swivel, ±15° Tilt
● 360° Rotaon Adjustment
● 2 LBS of High Grade Steel
● Single Stud Installaon
● Installaon Hardware Included
● 30 lb Maximum Weight Capacity