EN - 7
hole in the caster (3).
fasteners into place.
3.4 FITTING THE SEAT (Fig. 3.3)
Fit the seat (1) onto the plate (2) using the
3.5 ASSEMBLY OF THE CUTTING MEANS
ENGAGEMENT CONTROL LEVER
EXTENSION (Fig. 3.4)
•
(3).
3.6 CONNECTING THE BATTERY
(Fig. 3.5)
-
-
3.7 ASSEMBLING THE GRASS CATCHER
(Fig. 3.6)
•
-
3.8 FITTING THE “MULCHING”
ATTACHMENT (if provided) (Fig. 3.7)
• Use equipment marked “E”.
-
-
4. CONTROLS AND INSTRUMENTS
4.1 STEERING WHEEL (Fig. 4.1 no.1)
4.2 PARKING BRAKE (Fig. 4.1 no.2)
«A» =
«B» =
position «A».
4.3 CUTTING MEANS ENGAGE AND
BRAKE CONTROLS (Fig. 4.1 no.3)
Position «A
Position «B
IMPORTANT The lever must be operated
gently, avoiding rough movements.
-
(see 5.2).
4.4 CUTTING HEIGHT ADJUSTMENT
LEVER (Fig. 4.1 no.4)
This lever has several positions so the cut can
be regulated at various heights.
stop notches.
To Next Page
Loading...
Need help?
General
