EN - 151
◆ “Power View” Setting the power
Press the or (<0.5S) button to high- light “Power View” in the Display settings menu, and then
press (<0.5S) to select. Then with the or button choose between “Power” or “Current”.
Once you have chosen your desired selection, press the (<0.5S) button to save and exit to the
"Display setting" interface.
Note: The displayed value of the motor power corresponds to its current load and in some cases the
peak motor power is displayed.
◆ “SOC View” Battery view in volt percent
Press the or (<0.5S) button to highlight “SOC View” in the Display settings menu, and then
press (<0.5S) to select. Then with the or button choose between “percent” or “voltage“.
Once you have chosen your desired selection, press the (<0.5S) button to save and exit to the
"Display setting"
To Next Page
Loading...