EN - 153
◆ “Password”
Press the or (<0.5S) button to choose Password in the menu. Then by briefly pressing
(<0.5S) to enter the password selection. Now again with the or (<0.5S) buttons highlight
“Start Password" and press the (<0.5S) button to confirm. Now again using the or (<0.5S)
Button choose between “ON” or “OFF” and press the (<0.5S) button to confirm.
Now you can input your 4-digit pin code. By using the or (<0.5S) button choose numbers
between "0-9". By briefly pressing the (<0.5S) button you can move on to the next number. After
entering your desired 4-digit code, you must re-enter the 4-digits you chose, to ensure the code is
correct.
After selecting a password, the next time you turn on the system it will ask you to input your
password. Press the or (<0.5S) button to select the numbers, then press briefly (<0.5S) to
confirm.
After entering the wrong number three times, the system switches off. If you have forgotten the
password, please contact your retailer.
◆ Changing the password:
Press the or (<0.5S) button to choose Password in the menu. Then by briefly pressing
(<0.5S) to enter the password selection. Now again with the or (<0.5S) buttons highlight
“Password set" and press the (<0.5S) button to confirm. Now with the or . (<0.5S) buttons
and highlight “Reset Password” and with the (<0.5S) button to confirm. By entering your old
password once, followed by inputting the new password twice, then your password will be
changed.
◆ Deactivating the password:
To deactivate the password, use the or buttons to get to the menu point “Password” and
press the (<0.5S) button to highlight your selection. Press the or (<0.5S) button until is
shows “OFF”. Then press briefly (<0.5S) to select. Now enter your password, to deactivate it.
After 10 wrong passwords, the display will power-off automatically.
To Next Page
Loading...