EN - 177
General Operations
◆ Switching the E-bike System On/Off
Hold the on/off button for 2s to switch on E-bike system. When display is on, hold the on/off button
for 2s again, the E-bike system will be switched off. The E-bike system no longer uses the battery
power.
When the E-bike system is switched off, the leakage current is less than < 1 μA.
If the bike is not in use, the display will automatically turn off after 5 minutes. The shutdown time
can be set in the Automatic shutdown menu. If a password is set on the display, it must be entered
correctly before starting.
◆ Display interface
After switching on the e-bike system, the display shows the current speed and the daily distance
travelled, the total distance, the battery charge level, the selected motor assistance level, and the
battery status.
Press the "i" button to view additional driving data, see below:
ODO total distance travelled (km) → MAX maximum speed (km/h) → AVG average speed (km/h)
→ TIME Travelled time (min). → Range remaining range (km) → CAL energy consumption.
To Next Page
Loading...