EN - 178
◆ Switching Push-assist Mode On/Off
To activate the push-assist function, keep holding "-" button. After 2 seconds, E-bike is activated to
go at a uniform speed of 6 Km/h while the screen display .
The push-assist function is switched off as soon as you release the "-" button.
The walking assistant function may only be used when pushing the bike.
Attention! There is a risk of injury if the rear wheel is not in contact with the ground when using the
Walking Assistant.
◆ Switching the lighting On/Off
Press and hold the "+" button for 2 seconds to turn on the light of the e-bike. The display backlight
brightness will automatically decrease, and the lighting icon will appear. Turn off the wheel lighting
by pressing and holding the "+" button again for 2 seconds, the brightness of the display backlight
will return to its original value.
To Next Page
Loading...