9.
PC communication software,
Hi-Manager
(
for MS Windows)
With free PC communication software, Hi-Manager, it is easy to set the parameters
including torque, speed, fastening monitoring and quality control.
For changing parameters of controller by PC software, it require Log-in password.
For the manager Log-in password of Hi-Manager software, please contact to the
distributor or service center. The password can not be open to operators without
agreement of managing group. Hi-Manager without Log-in is available by request, too
9.1
Software install
-
PC Operating System
:
MS Windows
( 2000,
XP,Vista,WIN7,WIN8
)
-
Display
: 1024 x 768 (
Optimized
)
The Hi-Manager software require MS Dot Net framework
v2.0
or higher on your OS
before install.
Window
2000
and XP can be updated with Dot Net framework on the download center
of Microsoft web site.
(
www.microsoft.com
).
Microsoft
.
NET Framework
ver
2.0
For installation of Hi-Manager, just copy the file
(
Hi-Manager.exe
)
on your PC, and
double click for open.
9.2
How to use
-
Install the provided USB driver
(
HDC USB driver) on your PC
-
Connect the HDC controller to PC, and Power on.
-
Check COM port no. for HDC USB port on your PC.
example
)
CP210x USB to UART Bridge Controller
(
COM4)
-
Open the
Hi-Manager
software
-
Select the Comport no and click OK
-
Click
"
READ ALL
"
menu for read all parameters from the connected HDC controller.
-
For changing parameter, it require Manager Log-in password.
Mountz Inc - The Torque Tools Specialists - www.mountztorque.com
1080 N 11th St - San Jose CA 95112
408.292.2214
To Next Page
Loading...
