2
MOVADO BOLD MOTION USER GUIDE
Downloading and installing the phone app
The Movado BOLD app is designed for use with most
smartphones running Android 4.4 and higher or iOS 8
and higher. It does not support tablets.
The Movado BOLD app connects your watch to your
phone using Bluetooth
®
. Use the phone app to control
the information and notifications that are displayed on
your watch. If your watch is not connected to the phone
app, it will continue to tell the time, but you cannot use
the digital functions.
1. From your phone, go to www.movado.com/
boldmotion or search for Movado BOLD in your app
store.
2. Download and install the app onto your phone.
Pairing the watch with your phone
1. Activate the watch: press and hold the button until
lights begin moving around the edge of the dial—it
may take five to ten seconds.
2. Make sure that you have:
a. Charged the watch for at least four hours.
b. Downloaded the Movado BOLD app.
c. Turned on your phone’s Bluetooth. (See the
manufacturer’s instructions for your phone.)
d. Placed the phone and watch near each other.
NOTE: An error message is displayed if your phone is
not supported.
3. Open the Movado BOLD app, and then create an
account.
4. Follow the on-screen instructions to set up your watch.
The phone app automatically searches for nearby
watches.
5. Select your watch. If prompted, press and hold the
watch button until the lights rotate clockwise around
the dial. The phone app notifies you when the phone
and watch have paired successfully.
6. In the phone app, enable notification permissions.
This allows the phone app to access notifications
from other apps on your phone. After you enable
notification permissions, you can use the phone app
to push any notifications from a third-party app to the
watch.
NOTE: If you do not enable notifications in the app, you
cannot receive third-party notifications on the watch.
7. Select PREVIEW ON WATCH and complete the app
tour.
Configuring the watch
After you pair the watch to your phone and complete
the setup process, use the phone app to configure the
watch notifications and preferences, including selecting
notifications to send to the watch and setting high- or low-
priority vibration patterns for each selected notification.
You can also set up to 12 favorite contacts.
Select NOTIFICATIONS or PREFERENCES in the phone
app to change the watch settings. By default, quiet
mode is on and only incoming call and calendar event
notifications are enabled. You will receive incoming call
and calendar event notifications from 7 o’clock AM to
10 o’clock PM.
To turn quiet mode off:
Select PREFERENCES, and then select the slider next
to SILENCE WATCH NOTIFICATIONS BETWEEN XX
and XX.
Select PROGRESS to see your daily, weekly, or monthly
progress towards your daily step goals.
Select HELP to access the user manual, terms of use,
privacy policy, customer service phone number, or other
information about the watch, including the serial number.
You can also verify the remaining digital battery charge
on the phone app home screen.
To Next Page
Loading...
