LCDI POWER CORD
The LCDI device is a non-serviceable part. Attempting to open the device may expose
the user to hazardous electric shock, and voids any warranties and performance claims.
Manufacturer’s liability is limited to the replacement of the device.
1. Read manual for proper use and handling of this device.
2. Press "RESET" button before starting the unit. Press "TEST" to check function then
"RESET" again. Start the unit.
3. Do not immerse in water.
4. This device must only be plugged into an appropriate wall outlet.
5. In the event that this device trips, the cause of the malfunction should be corrected
befote any further use.
6. Using the device beyond recommended voltage poses risk to users.
"RESET" button
"TEST" button
WARNING
CAUTION
www.sylvane.com 1-800-934-9194
To Next Page
Loading...
