Mowox PM 4030 P User Manual

19 (EN)
6
6
.
.
3
3
S
S
T
T
A
A
R
R
T
T
O
O
F
F
T
T
H
H
E
E
E
E
N
N
G
G
I
I
N
N
E
E
To prevent accidental starting of the lawn mower, the device
has an engine brake #2, which must be retracted before
switching on the engine. If the brake lever is released, it must
return to the starting position; at this time, the motor switches
off automatically and the blade comes to an immediate stop.
Check the tension of lever #2 before each start. Make sure the
wire rope hoist is working smoothly (i.e. it is not tangled or
knotted).
Your lawn mower is designed for mowing regular grass (up to
250 mm).
Do not try to mow exceptionally tall dry grass or piles of leaves.
Residues could accumulate on the housing or come into contact
with the engine exhaust gases, which in turn can cause fire
hazards.
Before each attempt to start, make sure that the spark plug plug connector (10) is se-
curely plugged in.
6.3.1 Cold start pump („primer pump“) (engine DG 300, DG 500)
FOR PM 4030 P, 4650 S/ -HW
For a cold start, press the primer pump (21) min. 5×.
Note: With a warm engine (up to 1 minute after stopping the engine), pumping is

Mowox PM 4030 P Specifications

General

Brand	Mowox
Model	PM 4030 P
Category	Lawn Mower
Language	English