Moxa Technologies EDR-8010 Series - Specifications

- 11 -
LED
Color
State
Description
PWR1 Amber
On
Power is being supplied to power input
P1 on the main module.
Off
Power is NOT being supplied to power
input P1 on the main module.
PWR2 Amber
On
Power is being supplied to power input
P2 on the main module.
Off
Power is
NOT
being supplied to power
input P2 on the main module.
STATE
Green
On
The system passed the self-diagnosis
test on boot-up and is ready to run.
Blinking
Device reset is in progress, blinking
once per second.
Red On
The system failed the self-
diagnosis test
on boot-up.
MSTR/
H.TC
Green
On
The EDR-8010 is set as the Master of
the Turbo Ring, or as the Head of the
Turbo Chain.
Blinking
The Turbo Ring or the Turbo Chain is
down.
Off
The EDR-8010 is not set as the Master
of this Turbo Ring or is set as a
Member
of the Turbo Chain.
CPLR/
T.TC
Green
On
The EDR-8010 Series’ coupling function
is enabled to form a backup path, or
the
device is set as the Tail of the Turbo
Chain.
Blinking
The Turbo Ring or the Turbo Chain is
down.
Off
The EDR-8010 Series’ coupling function
is disabled, or the device is set as a
Member of the Turbo Chain.
VRRP/HA Green
On
The EDR-8010 is set as the Master of
the VRRP or HA.
Off
The EDR-8010 is not set as the Master
of the VRRP or HA.
VPN
Green
On
All VPN tunnels are working normally.
Amber On
Only parts of the VPN tunnels are
working normally.
Off
No active VPN connections.
USB
Green
On
USB drive successfully connected.
Blinking
USB data is being transmitted.
Red
On
USB dongle malfunction.
1G
Green
On
1G SFP link is up.
Off
No link or the SFP link is down.
10/100
Mbps
Green
On
10 or 100 Mbps copper link is up.
Off
No link or the copper link is down.
Specifications
Input Current
0.53 A @ 12 V
0.26 A @ 24 V
0.14 A @ 48 V