To Next PageTo Next Page
Need help?Do you have a question about the Moxa Technologies EDS-518E and is the answer not in the manual?
General| SFP Slots | 2 |
|---|---|
| Switching Capacity | 3.6 Gbps |
| MAC Address Table Size | 8K |
| Power Input | 12 to 45 VDC, redundant dual DC power inputs |
| Mounting | DIN-rail or wall mounting |
| Protocol Support | IGMP Snooping |
| LED Indicators | Power, Status, Link/Activity |
| Jumbo Frame Support | 9K bytes |
| Management | Telnet |
| Standards | IEEE 802.3 |
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
Details on configuring the USB console interface for switch access.
Steps for accessing and configuring the switch using the Command Line Interface.
How to access and configure the switch using the web-based graphical interface.
Procedures to disable Telnet and web access for enhanced network security.
Describes the main dashboard displaying switch status, system info, and event logs.
Covers essential settings for switch administration and control.
Configuration and management of Power over Ethernet features.
Setting up Virtual LANs for network segmentation and efficiency.
Settings and management for individual switch ports.
Understanding and configuring multicast traffic filtering.
Quality of Service settings for traffic prioritization.
Various security features for network protection.
DHCP client and relay agent configurations.
Simple Network Management Protocol settings.
Support for industrial communication protocols like EtherNet/IP and Modbus TCP.
Tools for network troubleshooting and analysis, such as Ping and LLDP.
Real-time monitoring of system resources and traffic statistics.
