PoE (PoE Models Only)
Power over Ethernet has become increasingly popular, due in large part to the reliability provided by PoE
Ethernet switches that supply the power to Powered Devices (PD) when AC power is not available, or is too
expensive to provide locally.
Power over Ethernet can be used with the following types of devices:
• Surveillance cameras
• Security I/O sensors
• Industrial wireless access points
• Emergency IP phones
In fact, it’s not uncommon for video, voice, and high-rate industrial application data transfers to be integrated
onto one network. Moxa’s PoE switches are equipped with many advanced PoE management functions,
providing vital security systems with a convenient and reliable Ethernet network. Moreover, Moxa’s advanced
PoE switches support the high power PoE+ standard, a 24 VDC direct power input, and 20 ms fast recovery
redundancy with Turbo Ring and Turbo Chain.
PoE Settings
The PoE settings interface gives users control over the system’s PoE power output, PoE power threshold, PoE
port configuration, and PD failure check. The PoE settings page is divided into three parts: PoE System
Configuration, PoE Port Configuration, and PoE Device Failure Check. Each part is discussed separately
below.
To Next Page
Loading...
Need help?
General
