Need help?Do you have a question about the Moxa Technologies EDR-810 Series and is the answer not in the manual?
General| Model | EDR-810 Series |
|---|---|
| Operating Temperature | -40 to 75°C (-40 to 167°F) |
| Mounting | DIN-rail mounting |
| WAN Ports | 2 x 10/100/1000BaseT(X) |
| Protocols Supported | SNMP, DHCP |
| Housing | IP30 |
| Certifications | EN 61000-6-2, IEC 61850-3, IEEE 1613 |
| Power Input | 12/24/48 VDC redundant dual inputs |
Details components and indicators on the front of the router.
Details components and connectors on the top of the router.
Details mounting features on the rear of the router.
Instructions for attaching the router to a DIN rail.
Instructions for mounting the router on a wall.
Safety warnings and guidelines for electrical connections.
Guidance on proper grounding for noise reduction.
How to connect the router's relay output.
How to connect the dual power inputs.
How to connect digital input signals.
Details on connecting via the console port for configuration.
Explains port configuration and pinouts for 10/100BaseT(X) ports.
Information on using SFP ports for fiber optic connections.
How to use the reset button to restore factory defaults.
Explains the function and status of each LED indicator.
To Next Page
