Moxa Technologies EtherDevice EDS-G205A-4PoE-1GSFP - Led Indicators

- 10 -
ATTENTION
To actively update DIP switch settings, power off and then power
on the EDS.
LED Indicators
The front panel of the EDS switches contain several LED indicators. The
function of each LED is described in the following table.
LED
Color
State
Description
P1 AMBER
On
Power is being supplied to power
input P1.
Off
Power is not being supplied to
power input P1.
P2 AMBER
On
Power is being supplied to power
input P2.
Off
Power is not being supplied to
power input P2.
10/100/1000
AMBER
On
TP port’s 10/100 Mbps link is active.
Blinking
Data is being transmitted at 10/100
Mbps.
Off
TP Port’s 10/100 Mbps link is
inactive.
GREEN
On
TP port’s 1000 Mbps link is active.
Blinking
Data is being transmitted at 1000
Mbps.
Off
TP Port’s 1000 Mbps link is inactive.
1000 GREEN
On
SFP module’s 1000Mbps link is
active.
Blinking
Data is being transmitted at 1000
Mbps.
Off
SFP module’s 1000Mbps link is
inactive.
PoE+
AMBER
On
The PoE device is connected by IEEE
802.3af standard
Off
No PoE power output or no PoE
connected PoE devices
Green
On
The PoE device is connected by IEEE
802.3at standard
Off
No PoE power output or no PoE
connected PoE devices
Red
Blinking
PoE failure:
- 1 time/s: PoE standard detection
failure
- 2 times/s: PoE current overload
Off
No PoE failure