NPort W2150A/W2250A Series Introduction
Product Specifications
1
10/100 Mbps, auto MDI/MDIX
RJ45
Magnetic Isolation Protection:
1.5 KV built-in
802.11a/b/g
Infrastructure, Ad-Hoc
802.11a: 14 dBm (typical)
(typical)
802.11g: 15 dBm (typical)
-80 dBm
DSSS/OFDM
802.11g: 54 Mbps (max.) with auto fallback (54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1 Mbps)
Up to 100 meters (in open areas)
-bit/128-bit data encryption
• WPA, WPA2, 802.11i: Enterprise mode and Pre
-Share Key (PSK) mode
-bit TKIP/AES-CCMP EAP-TLS, PEAP/GTC, PEAP/MD5, PEAP/MSCHAPV2, EAP-TTLS/PAP,
-TTLS/CHAP, EAP-TTLS/MSCHAP, EAP-TTLS/MSCHAPV2, EAP-TTLS/EAP-MSCHAPV2, EAP-TTLS/EAP-
-TTLS/EAP-MD5, LEAP
Reverse SMA
RS-232/422/485 (DB9 male connector)
-line Port Buffering:
Serial Line Surge Protection:
1 KV (level 2)
Serial Communication Parameters
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF
50 bps to 921.6 Kbps
64 KB
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
-422: TxD+, TxD-, RxD+, RxD-, GND
-485-4w: TxD+, TxD-, RxD+, RxD-, GND
-485-2w: Data+, Data-, GND