Moxa Technologies UPORT 1110 - Removing the Moxa Wince 5.0; CE 6.0 Driver

UPort 1100 Series Installation and Configuration
2-32
Removing the Moxa WinCE 5.0 / CE 6.0 Driver
1. Enter Control Panel

Remove Programs.
2. Select MOXA UPort 1110/1130/1150 Windows CE6 Driver Ver1.0
(For WinCE 6.0)
or
MOXA UPort 1110/1130/1150 Windows CE5 Driver Ver1.1
(For WinCE 5.0)
3. Click Remove.
4. Interface configuration
On the target device, go to Start

Programs

MOXA UP Configuration Panel\UPort Configuration
Utility to find the configuration tool.