EasyManuals Logo

Moxa Technologies UPORT 1110 User Manual

Moxa Technologies UPORT 1110
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #26 background imageLoading...
Page #26 background image
UPort 1100 Series Installation and Configuration
2-17
Unloading the Moxa Driver
The driver will not be unloaded when you remove the MOXA UPort 1100 from the PC. The Moxa driver must be
unloaded manually.
#rmmod mxuport1100_24
You can verify that the driver has loaded by entering the following command:
# lsmod
For additional information, please refer to readme.txt in the mxuport1100_24 directory.
Setting the Serial Parameters
The UPort 1130 supports three interfaces (RS-485 2W, RS-485 4W, RS-422) and the UPort 1150/1150I
support four interfaces (RS-232, RS-485 2W, RS-485 4W, RS-422). You can execute the setserial command
to set the port’s interface. The supported parameter are listed below.
Parameter Value Interface
port 0 RS-232
port 1 RS-485 2W
port 2 RS-422
port 3 RS-485 4W
Example:
To set the port’s information, type:
# setserial /dev/ttyUSB0 port 1
To retrieve the port's information, type:
# setserial -G /dev/ttyUSB0
Removing the Moxa Driver and Utility Files
To remove the Moxa files, navigate to /moxa/mxuport1100_24, and then type:
#make clean;
Both the driver and utility files will be removed.
Linux Kernel 2.6.x
The Linux driver provided with the UPort 1100 maps Linux host ttyUSBxx ports to UPort device ports. Once the
mapping has been set up, Linux users and applications can connect to a device port as if it were a ttyUSBxx port.
These drivers have been designed and tested for the majority of Linux distributions, including Linux kernel
version 2.6.x and follow. Please check Moxa’s website (http://www.moxa.com.
) for the latest Linux kernel
support.
The Linux drivers support the following models:
UPort 1110: 1-port RS-232 USB-to-Serial Converter.
UPort 1130: 1-port RS-422/485 USB-to-Serial Converter.
UPort 1130I: 1-port RS-422/485 USB-to-Serial Converter with isolation Protection.
UPort 1150: 1-port RS-232/422/485 USB-to-Serial Converter.
UPort 1150I: 1-port RS-232/422/485 USB-to-Serial Converter with isolation protection.

Other manuals for Moxa Technologies UPORT 1110

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Moxa Technologies UPORT 1110 and is the answer not in the manual?

Moxa Technologies UPORT 1110 Specifications

General IconGeneral
Display-
Baud rate921.6 Kbit/s
RS-232 signalsRx, Tx
Serial interface typeRS-232
Serial ports quantity1
Electrostatic Discharge (ESD) protection15 kV
Product colorBlue, Grey
Operating temperature (T-T)0 - 55 °C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LED indicatorsUSB
Linux operating systems supportedYes
Windows operating systems supportedWindows 2000, Windows 2000 Professional, Windows 98, Windows 98SE, Windows ME, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64

Related product manuals