Moxa Technologies UPORT 1110 User Manual

UPort 1100 Series Installation and Configuration
2-10
Configuring the COM Port
After the driver and hardware have been successfully installed, the new COM port will have a COM number and
can be accessed and controlled just like your PC’s built-in COM ports. If you need to change the baud rate,
parity, or other COM port settings, you may use your serial communication application to make those changes.
You may also go to Device Manager and right-click the MOXA USB Serial Port, which will be listed under
Ports along with your PC’s built-in COM ports. In the context menu that pops up, you may select Properties
in order to modify the COM port settings.

Moxa Technologies UPORT 1110 Specifications

General

Display	-
Baud rate	921.6 Kbit/s
RS-232 signals	Rx, Tx
Serial interface type	RS-232
Serial ports quantity	1
Electrostatic Discharge (ESD) protection	15 kV
Product color	Blue, Grey
Operating temperature (T-T)	0 - 55 °C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LED indicators	USB
Linux operating systems supported	Yes
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows 98, Windows 98SE, Windows ME, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64