Moxa Technologies UPORT 1110 User Manual

UPort 1100 Series Installation and Configuration
2-13
Removing the Converter
The converter is a plug and play device. No special procedures are required to remove the converter; you may
simply pull the converter out of the USB port. You should verify that no data is being transmitted before
removing the converter.
Removing the converter does not remove the drivers. The drivers remain in place so that the converter can be
automatically detected and installed if it is pluged back into the USB port.
The converter can also be uninstalled through the Device Manager, the same as other Windows devices.
Right-click the converter, which will be found under Multi-port serial adaptors, then select Uninstall from
the context menu.

Moxa Technologies UPORT 1110 Specifications

General

Display	-
Baud rate	921.6 Kbit/s
RS-232 signals	Rx, Tx
Serial interface type	RS-232
Serial ports quantity	1
Electrostatic Discharge (ESD) protection	15 kV
Product color	Blue, Grey
Operating temperature (T-T)	0 - 55 °C
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
LED indicators	USB
Linux operating systems supported	Yes
Windows operating systems supported	Windows 2000, Windows 2000 Professional, Windows 98, Windows 98SE, Windows ME, Windows Vista Business, Windows Vista Business x64, Windows Vista Enterprise, Windows Vista Enterprise x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64