EchoTable User Manual Page 14 of 45 DCR-00576
(MAN-0011-D)
Use Instructions
Powering the Product
The product may be powered by AC power from a wall outlet or by DC power via the
optional battery. The product is “on” whenever it is plugged into AC power or when a
charged battery is installed. The product should not be positioned in a way that would
make it difficult to remove power by unplugging the AC power cord or removing the
battery.
While on DC power only the product may be turned off by pressing and holding the
“off” button on the battery cradle for 3 seconds. Pressing the “on” button on the
battery cradle will turn the product back on.
See the section “Battery Information” for indicator information and proper care for
batteries.
WARNING
• To reduce the risk of electrical shock, grounding reliability can only be achieved when the
equipment is connected to an equivalent receptacle marked “hospital only” or “hospital
grade.”
• If damage has occurred to the power cord, immediately remove the cord from service. Failure
to do so could result in serious injury or death.
• If damage has occurred to the battery, immediately remove the battery from service. Failure
to do so could result in serious injury or death.
• The battery should be periodically inspected for damage. Replace the battery if necessary.
To Next Page
Loading...