EasyManua.ls Logo

MPI EchoTable 051/251 - Page 6

Default Icon
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety Warnings & Cautions
EchoTable User Manual Page 6 of 45 DCR-00576
(MAN-0011-D)
Verify the area around the product is free of impediments before operating to
prevent injury or equipment damage.
Keep hands and feet clear from beneath the patient surface when lowering
surface height or making positioning adjustments in order to avoid possible injury.
Keep hands clear of the Fowler section hinges during operation to avoid possible
injury.
Sitting at the end of the patient surfaces can result in device instability. Do not
allow a patient to sit at the head end of the patient surface.
Protect vinyl upholstery from sharp objects and abrasion to avoid damage.
Always read manufacturer’s instructions and warnings before using any cleaning
product or disinfectant. Refer to instructions located in this manual for vinyl
cleaning recommendations.
Substances such as imaging gels and alcohol will not damage the vinyl surface
when immediately removed. Extended exposure for longer than a few minutes
can damage the top coat and will eventually discolor vinyl.
Do not use abrasives to clean painted surfaces.
It is recommended that the product be cleaned between patients; please follow
your facility’s documented policy.
Keep this manual available for future reference.
If the product is used adjacent to other electrical equipment, observe the product
and the other electrical equipment to ensure they operate as intended.
Failure to latch Drop Sections may result in patient injury. Verify Drop Section is
locked in position before and after use.
Verify the head rest is secure prior to using the product.
Verify the side rails are secure prior to using the product and after each side rail
adjustment.
Verify the stirrups are secure prior to using the product and after each stirrup
adjustment.
Do not exceed the weight capacity of the product.