CAUTIONS
1. The induction hotplate must be installed by qualified personnel or technicians. We have
professionals at your service. Please never conduct the operation by yourself.
2. The cooker will not be installed directly above a dishwasher, fridge, freezer, washing ma-
chine or clothes dryer, as the humidity may damage the cooker electronics
3. The induction hotplate shall be installed such that better heat radiation can be ensured to
enhance its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
ELECTRICAL CONNECTION
These appliances have a large Power Rating and must be ‘hard wired’ into a suitable fused
spur adjacent to the appliance housing. The product must be installed by a Qualified Electri-
cian.
Please note that a switchable spur should be accessible above the work surface in order that
the power can be turned off.
If the cable is damaged or to be replaced, the operation must be carried out the by after-
-sale agent with dedicated tools to avoid any accidents.If the appliance is being connected
directly to the mains an omnipolar circuit-breaker must be installed with a minimum opening
of 3mm between contacts.
The installer must ensure that the correct electrical connection has been made and that it
is compliant with safety regulations.
The cable must not be bent or compressed.
The cable must be checked regularly and replaced by authorised technicians only.
50
MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 50MPM-45-IM-07, MPM-60-IM-04, MPM-60-IM-05_instrukcja_v03.indd 50 30.03.2020 10:1930.03.2020 10:19
To Next Page
Loading...
