MPPT Huber SCL-60A User Manual

20
 How to Apply Equalization Function
You must enable battery equalization function in monitoring software first.
Then, you may apply this function in device by either one of following methods:
1. Setting equalization interval.
2. Or, press the button for 3 seconds until LCD shows “ ”.
 When to Equalize
In Absorption stage, if the charging current drops lower than the maximum
charging current of battery equalization, the controller will start to enter Equalize
stage.

MPPT Huber SCL-60A Specifications

General

Brand	MPPT
Model	Huber SCL-60A
Category	Controller
Language	English