MPPT Huber SCL-60A User Manual

25
7. TROUBLE SHOOTING
Situation
Solution
Fault
Code
Fault Event
01
Over charge current
1. Restart the charger.
2. If the problem remains, please contact your
installer.
02
Over temperature
1. Keep the charger in the cool environment.
2. If the problem remains, please contact your
installer.
03
Battery voltage under
1. Check the battery wire connection.
2. If the wire connection is ok, please contact your
installer.
04
Battery voltage high
1. Reconnect the battery to the charger.
2. If the problem remains, please contact your
installer.
05
PV high loss
1. Please check the voltage of the solar panel, it
should be less than 140V.
2. If the voltage is ok, please contact your installer.
06
Battery temperature
too low
1. Check your remote temperature sensor and
your battery ambient temperature.
2. If the problem remains, please contact your
installer.
07
Battery temperature
too high
1. Check your remote temperature sensor and
your battery ambient temperature.
2. If the problem remains, please contact your
installer.
No display in LCD screen.
1. Check battery wire connection.
2. Push the button, if the problem remains, please
contact your installer.

MPPT Huber SCL-60A Specifications

General

Brand	MPPT
Model	Huber SCL-60A
Category	Controller
Language	English