13 - RJ45 Communication Interface(This feature is still in development,,,,,,.Cannot use yet,,,, )
6
1 - Battery Status LED Indicator
An LED indicator that shows battery status or system errors.
2 - Charging Status LED Insdicator
An LED indicator that shows charging status and overvoltage of pv.
3 - Setting Button1
Set load work mode,battery type and max charge current.
4 - Setting Button2
Set load work mode,battery type and max charge current(in manual mode used for
load ON/OFF).
5 - LCD Digital Display
Dispaly the system status
6 - Wiring Box Cover
Sheet metal wiring box cover protects power connections
7 - FAN
FAN to dissipate Internal circuit heat
8 - Heatsink
Aluminum heatsink to dissipate controller heat
9 - Mounting Hanger
Keyhole slot for mounting
10 - Solar Module Terminals
Connect solar modules
11 - Battery Terminals
Connect batteries
12 - Load Terminals
Connect loads
Communicate with personal computer
To Next Page
Loading...
Need help?
General
