To Next Page

To Previous Page

9 Visualization

Maschinenfabrik Reinhausen GmbH 2020 1134453918/14 EN ETOS

Figure80: Communication

► Go to Home > Communication.

9.8 Name plate

You can enter the data of the name plates, the on-load tap-changer and the

motor-drive unit and display it later.

9.8.1 Enter the name plate data

You can enter the name plate data for the transformer, the on-load tap-

changer and the motor-drive unit.

Figure81: Nameplate

1. Go to Settings > Parameters > System > Nameplate.

2. Select the desired parameter.

3. Set the parameter.

4. Press the Accept button to save the modified parameter.

Questions and Answers:

Need help?

Do you have a question about the MR ETOS TD and is the answer not in the manual?

MR ETOS TD Specifications

General