MRC MG-3002 - Table of Contents

TABLE OF CONTENTS
1. FEATURES..................................................................1
2. SPECIFICATIONS........................................................2
3. FRONT PANEL DESCRIPTION......................................
.
4
3-1 Display................................................................. 4
3-2 Power Button........................................................4
3-3 Hold Button..........................................................
.
4
3-4 REC Button...........................................................4
3-5 ZERO Button ........................................................4
3-6 Mode Button ( DC, AC Button ), SET Button............4
3-7 Input socket.........................................................
.
4
3-8 Probe Handle........................................................4
3-9 Probe Sensing Head..............................................
.
4
3-10 Probe Plug.......................................................... 4
3-11 Probe Head Cover...............................................
.
4
3-12 RS-232 Output Terminal......................................
.
4
3-13 Reset button.......................................................4
3-14 DC 9V Power Adapter Input Socket......................
.
4
3-15 Stand.................................................................
.
4
3-16 Tripod Fix Nut.....................................................4
3-17 Battery Compartment/Cover.................................4
3-18 Battery Cover Screw............................................4
4. MEASURING PROCEDURE...........................................
.
5
4-1 AC/DC magnetic field measurement.......................
.
5
4-2 Data Hold.............................................................7
4-3 Data Record.........................................................
.
7
5. ADVANCED MEASURING PROCEDURE..........................8
5-1 Auto power ON/OFF management..........................9
5-2 Change the unit ( mT, G )......................................9
5-3 For the further calibration usage, not available
for the user..........................................................10
6. RS232 PC SERIAL INTERFACE.....................................
.
10
7. BATTERY REPLACEMENT.............................................11
8. SYSTEM RESET..........................................................
.
12