MRC MG-3002 - Measuring Procedure; AC;DC Magnetic Field Measurement

4. MEASURING PROCEDURE
4-1 AC/DC magnetic field measurement
1)Power ON the meter by pressing the " Power
Button " ( 3-2, Fig. 1 ) once.
2)
Press the " Mode Button " ( 3-6, Fig. 1 ) once ,
the Display will show the following screen in sequence :
Under mT unit Under G unit
N(S) 0 mT a1 N(S) 0 G a2
.0 0
N(S) 0.0 mT b1 N(S) 0 G b2
0 .0
0 mT c1 0 G c2
.0
AC 0 AC
0.0 mT d1 0 G d2
0
AC .0 AC
Note :
a1 screen is ready for DC 0.1 mT resolution measurement.
b1 screen is ready for DC 0.01 mT resolution measurement.
c1 screen is ready for AC 0.1 mT resolution measurement.
d1 screen is ready for AC 0.01 resolution measurement.
a2 screen is ready for DC 1 G resolution measurement.
b2 screen is ready for DC 0.1 G resolution measurement.
c2 screen is ready for AC 1 G resolution measurement.
d2 screen is ready for AC 0.1 G resolution measurement.
5