MS ENERGY e21 - Installation Guide; Assemble; Disassemble

ENG
11
3. INSTALLATIONGUIDE


Assemble
1.Unfold the pole and fasten the folding
lock.
2.Alignthecommunicationlineterminalsof
the instrument and the controller with
thenotchconnection.
3.AligntheT‐barofthescootertheninsert
itinto thepole, usethe screwprovided
withthescootertoinstallandfixit.
Disassemble
1.LoosenthescrewsthatsecuretheT‐bar
ofthescooter.
2.Pullouttheheadofthescooter,unplug
the communication line between the
display and the controller, the
dismantling part of the head of the
scooteriscomplete.