MS ENERGY e21 - Charger

ENG
23
Charger
ThededicatedchargerprovidedbyFactoryhasachargingprotectiontimingfunction.
Ch
arginginstructions
 Openthechargingportcoverontheelectricscooterandfirstlyinsertthecharger
outputconnectorintothescooterchargingport.
 Then,Insertthechargerinputpowerplugintothepowersocket(AC100V‐240V,
50/60Hz)
 Chargerlightisredtoindicatethatchargingisinprogress;whenthechargerlight
turnsgreen,itindicatesthatthebatteryisfullycharged.Then,firstlydiconnect
Charger power plug from the power socket, then disconnect plug from the
scooter.
 Whenchargingthebattery,placeitinadry,ventilatedenvironment.
 After charging,besureto returntheprotectiverubbercoveron thescooter!
Entry of dust, water or other foreign objects into the slot can damage the
scooter!
Discbrakes
Ifyoufeelthebrakeistightwhenyouareriding,youcanadjustthediscbrakebyloosing
thescrewontheRotaryKnob,turntheRotaryknobtotherightbyalittleandtighten
thescrew.Ifyoufeelthebrakeisloose.youcanturntheRotaryknobtotheleftbya
littleafterloosingthescrewontheRotaryKnob,andthentightenthescrew
Handleshake
Ifyoufeelthestandpipeislooseandshakeswhenyouareriding,pleasecheckfronfork
andfoldingmechanismandtightloosepart.