MSA Cairns 1010 - 2 Fire Helmet Weight Ranges

MSA Cairns Fire Helmets6
US
CAUTION!
Follow the procedures in Section 5.3 "Routine Inspection" to inspect the fire helmet after EACH use.
Replace any part of the fire helmet that shows signs of wear or damage.
Use only components and accessories that are included with the original fire helmet or approved by
MSA. Using unauthorized components or accessories can adversely affect fire helmet performance.
Do not alter, paint, or attach any item that is not recommended by MSA to the fire helmet.
Do not use abrasive cleaners or solvents to clean the fire helmet.
Use only fire helmet markings (front identification shields, title tapes, decals, retro reflective trim) and
fire helmet accessories (flashlight brackets, communications headsets) that are supplied and/or
approved by MSA.
2 Fire Helmet Weight Ranges
Below are the ranges of MSA Cairns fire helmet weights. The specific weight of your fire helmet varies
depending on your selected configuration and ensemble options when shipped.
Helmet Model Weight Range (oz)
1010 and 1044 (Black Impact Cap) 56- 64
1010 and 1044 (Grey Impact Cap) 53 -61
880 55-61
660C and 664 48-52
360S,360R,360-13 40-46
HP3 38 -40
N5A 65-67
N6A 67 -69