4 Maintenance
US MSA Cairns® 1836 17
4.4 Advanced Inspection
WARNING!
Only a manufacturer-trained organization, verified organization, or verified Independent Service Provider (ISP) can
perform advanced inspection.
Failure to follow this warning can result in serious personal injury or death.
Advanced inspection includes all of the items listed for routine inspection and all of the following items.
After the fire helmet is put into service, do an advanced inspection of all protective ensemble elements at least every 12
months, or whenever a routine inspection removes the ensemble from service, whichever occurs first.
NOTICE
For the purposes of replacement (according to NFPA 1851) and warranty, the manufacturing date for the fire helmet
ensemble is based on the oldest original part shipped as a component of the complete compliant fire helmet ensemble,
irrespective of the manufacturing date of the replaced parts.
Complete the following steps to disassemble the fire helmet and inspect all components for the conditions listed in 4.3
Routine Inspection.
1a Accountablity Brackets (optional) 8 Bourkes
1b Standard Anchor Bases 9 Suspension
2 Front Holder (5.5"or 6"option) 10 Goggles
3 Front Bracket 11 Cushion Liner
To Next Page
Loading...
