MSA EVOLUTION Receiver Station - 4 Operating the System; 5 Settings on the LCD; Functions of the OSD-Buttons (on Screen Display); Structure of the Sub-Menus

14
GB
GB
4 Operating the system
Optimal radio transmission and hence maximum range is only
guaranteed if the receiver antenna is directed towards the
thermal imaging camera with the transmitter.
The range (see technical data) and hence problem-free radio
transmission is dependent upon ambient conditions. Shielding
materials such as walls and steel reinforced concrete, metal
constructions or even high air humidity can cause disturbances
and hence affect the range of a perfect radio transmission.
Should the transmission on one channel be disturbed then a
changeover can be made to the other channel on the camera
and receiver unit.
5 Settings on the LCD
5.1 Functions of the OSD Buttons (On Sreen Display)
No. Button Function
1. Click : OSD-Menu appears
1 Menu 2. Click : Changes the OSD sub-
menu that can be monitored
2 Select 1. Moving within the main menu
2. Moving within the sub-menus
in the main menu
3 Power Power on/off
4 Up To change the value in the sub-menu
within the main menu
5 Down To change the value in the sub-menu
within the main menu
●
STATUS UP DOWN SELECT MENU
● ●
●
5.2 Structure of the Sub-menus
Each sub-menu can be selected with the menu button. In order
to select the next sub-menu (brightness, contrast, colour, tint,
sharpness, scaling), please press the select button. In order to
change the values of the selected menu, use the „Up” and
„Down” button.
If no buttons are pressed for a few seconds, then the settings
made are stored. The menu button is used to display the menu
and to change over between the sub-menus.
In order to return to the main menu please press the menu button
once (only).
5.2.1 „Picture” Menu
Main Menu Sub-Menu Setting Standard
Range Setting
brightness 0 ~ 100 50
contrast 0 ~ 100 50
color 0 ~ 100 50
tint 0 ~ 100 50
Picture image 0 ~ 100 50
Fill aspect Fill aspect
scaling
ratio, normal, wide,
ratio
wide, zoom, zoom
2
,
anamorphic
“Picture” Menu on the LCD
5.2.2 „Advanced” Menu
Main Menu Sub-Menu Setting Standard
Range Setting
sharpness 1 ~ 5 3
gamma video, crt video
color temp 5000, 7300, 9300
advanced 9300, user
user red 0 ~ 100 not used
user green 0 ~ 100 not used
user blue 0 ~ 100 not used