MSA EVOLUTION Receiver Station - Norsk

N
67
N
Innhold
Sikkerhetsinformasjon og informasjon om ansvar 67
1 Innledning 68
2 Leveringsomfang 68
3 Setup 68
3.1 Start-up av hovedstasjonen 68
3.1.1 Åpne kofferten 68
3.1.2 Sette opp antenne 68
3.1.3 Kople til antennen 69
3.1.4 Strømtilførsel 69
3.1.5 Bryter for valg av kanal 69
3.2 Forberede EVOLUTION 4000 for video overføring 69
3.3 Forberede EVOLUTION 5000 for video overføring 69
4 Betjene systemet 70
5Innstillinger på LCD 70
5.1 Funksjoner til OSD-tastene (On Screen Display) 70
5.2 Strukturen til undermenyene 70
5.2.1 „Picture” meny 70
5.2.2 „Advanced” meny 70
5.2.3 „Video” meny 71
5.2.4 „Options” meny 71
5.2.5 „Utilities” meny 71
6Vedlikehold 72
7 Rengjøring 72
8Tekniske data 72
8.1 Sender (sender på/i kameraet) 72
8.2 Hovedstasjon 72
8.3 Rekkevidde 73
9 Spesiell bemerkning 73
10 Garanti 73
11 Bestillingsinformasjon 73
▼
▼
▼
Safety Instructions
● These instructions must be read, thoroughly and with
attention, considered and understood by all persons that
make decisions regarding the use of this product, that
operate it, care for it and maintain it or monitor its
functionality.
● In addition to instructions regarding the correct use of the
product these instructions for use also contain important
information for the avoidance of hazards (§ 3, Sec. 3,
Gesetz über technische Arbeitsmittel (Law Governing
Technical Working Equipment).
● Before the product is used, the user must decide whether
it is suitable for the intended use, taking into account
these instructions.
Liability Instructions
● MSA AUER accepts no liability in the event of incorrect or
improper use of the product. Selection and use of the
product are exclusively the responsibility of the persons
involved.
● Warranty claims and claims from any warranties taken
over by MSA AUER for this product are invalid if it is not
used, maintained or serviced in accordance with the
instructions for use.
● The above corresponds to the Liability and Warranty
Regulations of the MSA AUER General Sales Conditions;
it does not modify them.
Maintenance Notes
● This product is to be monitored and maintained by trained
specialists at regular intervals. Records are to be kept of
the inspections and maintenance. Only original MSA AUER
replacement parts are to be used for repair work. Repairs
and maintenance may only be carried out by authorised
workshops or MSA AUER. The authorised workshops are
responsible for the provision of the correct technical
information about equipment, components and
maintenance guidelines. Alterations to equipment or
components are not permitted and invalidate the approval.
● MSA AUER is only responsible for maintenance and repair
works carried out by MSA AUER itself.