Ultima
®
X Series
Gas Monitor
Safety Manual
SIL 2 Certified
"
The Ultima X Series Gas Monitor is qualified as an SIL
2 device under IEC 61508 and must be installed, used,
and maintained in accordance with this manual if
compliance with this IEC functional safety standard
is desired. Failure to do so can result in a reduced
safety level.
In the U.S., to contact your nearest stocking location, dial toll-free 1-800-MSA-INST
To contact MSA International, dial (724) 776-8626.
© MSA 2015 - All Rights Reserved
This manual is available on the internet at www.msasafety.com.
Inquiries can also be e-mailed to customer.service@msasafety.com.
Manufactured by
MSA NORTH AMERICA
1000 Cranberry Woods Drive, Cranberry Township, PA 16066
(L)- Rev 1 Y-HLR 10100751
To Next Page
Need help?
General
